Product Categories
(Total 12 Products for Fluoropolymer Ptfe Lined Elbow)
RANA PTFE Lined Elbow Purpose: It is mainly used to connect two pipes with the same or different nominal diameters, so that the pipes can be turned at a certain angle. Applicable medium: suitable for various concentrations of sulfuric acid, hydrochloride acid, hydrofluoric acid, aqua regia and various organic acids,...
Fluoropolymer PFA Lined SS304 Elbow Pipe fittings
PFA Lined SS304 Elbow can be made in 90 degrees or 45 degrees. Elbow Type : 2 Fixed Flange for PFA/ PTFE Lined elbow Can be customized : * 1 Fixed flange and 1 lap joint flange
* 2 Lap joint flange
Housing Material：* Carton Steel , * Stainless Steel
PFA Lined SS304 Elbow Pipe fittings
Pipe Fitting Steel Elbow Lining Flupropolymer PTFE, PFA Lined Elbow or Fvdf Lined Elbow introduction: The Lined Elbow is the steel elbow lined with a layer of PTFE or PFA. The main purpose is to improve the corrosion resistance of the elbow, pipeline or valve, such as for transporting acid and base liquid, or improve...
45 Degree Steel Elbow Lined PTFE
RANA has nearly 30 years lining experinces, our PTFE Lined Tanks are all made by advanced lining technology, these lined tanks are widely use in chemical industry, pharmaceutical industry, and can even meet a much more strict quality demand for electronic grade chemicals. 45 Degree Steel Elbow Lined PTFE
The most...
PTFE Lined Steel Elbow Please note:1) When the lined pipes and fittings diameter DN ≥ 500mm, it belongs to the equipment category.2) If the PTFE lined elbow is used under negative pressure, please explain when ordering, and then lining will be carried out according to thenegative pressure resistant process.3) If...
90 Degree Pipe Elbow Lined PFA
RANA molding lining process (isostatic pressing process) can also be made by the winding process, but the shapes of the pipe fittings are diversified, so the production efficiency is good, and the molding process is now more used. RANA PTFE and PFA lined elbow can be processed into 90° or 45°, or according to...
Lined PTFE PFA anticorrosive Elbow Pipe fitting
PTFE and PFA Lining Anticorrosive Elbow Pipe fitting
Fluoropolymer lining equipment is a kind of product which is made of PTFE resin polytetrafluoroethylene sheet by hydraulic process, isopressing process, hot pressing welding process, bonding process, etc., which are uniformly lined on the metal tank container and...
PTFE Lined 90 degree Pipe elbow for Chemicals
Stainless Steel Pipe Reducing Tee Lined PTFE With the rapid development of the international and domestic semiconductor industries, the semiconductor industry's electronic chemicals have strong demand for various fluoropolymer lined container equipment. RANA's foreign experts are employed to develop and manufacture...
PTFE Pipe elbow for Chemicals Pipe fitting
PTFE Lined Pipe Elbows
RANA specialized in the production of fluorine PTFE GBK sheet, New PTFE GBK sheet, PFA GBK sheet, ECTFE GBK sheet, PVDF GBK sheet, PTFE etched sheet. Meanwhile, we are the top rank manufacturer of fluoroplastic lined equipment in China, our products include lined tanks, lined vessels, lined...
PFA Pipe elbow for Chemicals Pipe fitting
Steel lining PTFE elbow chemical properties:
These PTFE or PFA lining elbows can be made in 45℃ and 90 ℃.
Weathering resistance: Irradiation resistance and low permeability: long-term exposure to the atmosphere, surface and performance remain unchanged.
Non-combustibility: The oxygen limit is below 90.
Acid and alkali...
Steel Pipe fitting elbow lining PTFE
Steel Pipe fitting elbow lining PTFE there are 45° and 90° elbow. Fluoropolymer PTFE, PFA lined pipe and fittings such as straight pipe, elbow, tee, cross, reducer are normally used to transport acid, alkali, alcohol, gas, liquid and other refined chemicals. In order to prolong the service life of our lined equipment,...
Steel Lining PTFE Anticorrosion Elbow
PTFE Lined Anticorrosion Elbow
RANA specialized in the production of fluorine PTFE GBK sheet, New PTFE GBK sheet, PFA GBK sheet, ECTFE GBK sheet, PVDF GBK sheet, PTFE etched sheet. Meanwhile, we are the top rank manufacturer of fluoroplastic lined equipment in China, our products include lined tanks, lined vessels,...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Ms. Sherry
Tel:+86-0523-88129878
Fax:86-0523-88919880
Mobile Phone:++86 18061038567
Email:ranacen@163.com
Address:No. 369 South Renmin Road, Jiangyan District, Taizhou City, Jiangsu Province, China., Taizhou, Jiangsu
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
